Its Easy – NetScaler 12 Step by Step Installation and Configuration Guides

With the availability of all the latest tools and blogs like these everything is easy, so our theme for these blogs is to MAKE IT EASY . This post will contain all the necessary links for Netscaler 12.x installation and Configuration step by step guides. These configurations will apply for previous releases of Netscaler like 11.x.

NetScaler Basics for beginners

below post will clear the basics that will help you to understand how netscaler communication works.

Netscaler VPX installation and Licensing

Below post will cover the Netscaler VPX installation on ESXi host and Licensing

Generate CSR and Certificate Installation on Netscaler

This post will cover CSR generation on Netscaler 12.x , Certificate generation from Microsoft CA and Certificate installation.

LDAP authentication for Netscaler GUI or Management access

Load Balancer Configuration (SSL Proxy/Reverse Proxy/SSL Offload)

XenDekstop and XenApp Netscaler gateway configuration

On Premise XenMobile 10.7 Configuration on Netscaler

XenMobile Cloud MAM Configuration for On premise NetScaler

Siva Sankar

Siva Sankar works as Solution Architect in Abu Dhabi with primary focus on SDDC, Automation,Network Virtualization, Digital Workspace, VDI, HCI and Virtualization products from VMWare, Citrix and Microsoft.

9 thoughts on “Its Easy – NetScaler 12 Step by Step Installation and Configuration Guides

  • February 16, 2018 at 6:31 pm
    Permalink

    Awesome Blog Series, I am sure many will be benefitted!!

    Reply
  • May 23, 2018 at 4:28 pm
    Permalink

    coolest ones, bro

    Reply
  • September 25, 2018 at 3:16 pm
    Permalink

    hi dear

    i use your learning and run netscaler and run application on local ip . i have 2 question :
    1-could it be nat ? ia have 1 public address on my route . how do i can nat without dns .
    i want users run application on web for example type in browser 188.255.145.x:8083 and open netscaler but know when type address direct to local dns and can not open netscale .

    Reply
    • September 26, 2018 at 9:08 am
      Permalink

      Dear

      you can NAT your VIP with public ip and use it externally. however, please note if your virtual server is SSL with IP it wont work and if you want to use port like 8083 you need to mention that while creating virtual server.
      for SSL error you can bypass by creating local DNS in users machines and if your certificate is internal. Install root cert on their machines.

      Thanks,
      Siva

      Reply
  • October 11, 2018 at 7:37 am
    Permalink

    Hi Siva,

    Thanks so much for your post. Very helpful to me.
    I get this error “JSON.parse: unexpected character at line 1 column 229 of the JSON data” whenever I go to connect to my AD using the LDAP Authentication.

    “JSON.parse: unexpected character at line 1 column 229 of the JSON data”

    Thanks

    Reply
    • May 20, 2019 at 6:53 am
      Permalink

      Dear

      follow below article and try with command, some times you might get errors because of browsers or cookies.

      https://support.citrix.com/article/CTX108876

      if you are getting errors with command also, better upgrade firmware, as netscaler firmwares most of the times will have lots of bugs.

      Thanks
      siva

      Reply
  • May 10, 2019 at 2:23 pm
    Permalink

    can we add Virtual machine as resource in netscaler

    Reply
    • May 20, 2019 at 6:45 am
      Permalink

      Dear

      I assume that you are asking about vmware resource pool. you can add the netscaler VM on a resource pool in vcenter no issues.

      Thanks,
      siva

      Reply

Leave a Reply to behzad Cancel reply

Your email address will not be published. Required fields are marked *

Show Buttons
Hide Buttons