Its Easy – NetScaler 12 Step by Step Installation and Configuration Guides

9 thoughts on “Its Easy – NetScaler 12 Step by Step Installation and Configuration Guides”

• 

  Venkatesh

  February 16, 2018 at 6:31 pm

  Permalink

  Awesome Blog Series, I am sure many will be benefitted!!

  Reply
• 

  Bijumon Chacko

  May 23, 2018 at 4:28 pm

  Permalink

  coolest ones, bro

  Reply
  • 

    Siva SankarPost author

    May 23, 2018 at 5:23 pm

    Permalink

    Thanks Biju

    Reply
• 

  behzad

  September 25, 2018 at 3:16 pm

  Permalink

  hi dear

  i use your learning and run netscaler and run application on local ip . i have 2 question :
  1-could it be nat ? ia have 1 public address on my route . how do i can nat without dns .
  i want users run application on web for example type in browser 188.255.145.x:8083 and open netscaler but know when type address direct to local dns and can not open netscale .

  Reply
  • 

    Siva SankarPost author

    September 26, 2018 at 9:08 am

    Permalink

    Dear

    you can NAT your VIP with public ip and use it externally. however, please note if your virtual server is SSL with IP it wont work and if you want to use port like 8083 you need to mention that while creating virtual server.
    for SSL error you can bypass by creating local DNS in users machines and if your certificate is internal. Install root cert on their machines.

    Thanks,
    Siva

    Reply
• 

  champ

  October 11, 2018 at 7:37 am

  Permalink

  Hi Siva,

  Thanks so much for your post. Very helpful to me.
  I get this error “JSON.parse: unexpected character at line 1 column 229 of the JSON data” whenever I go to connect to my AD using the LDAP Authentication.

  “JSON.parse: unexpected character at line 1 column 229 of the JSON data”

  Thanks

  Reply
  • 

    Siva SankarPost author

    May 20, 2019 at 6:53 am

    Permalink

    Dear

    follow below article and try with command, some times you might get errors because of browsers or cookies.

    https://support.citrix.com/article/CTX108876

    if you are getting errors with command also, better upgrade firmware, as netscaler firmwares most of the times will have lots of bugs.

    Thanks
    siva

    Reply
• 

  Anant Aggarwal

  May 10, 2019 at 2:23 pm

  Permalink

  can we add Virtual machine as resource in netscaler

  Reply
  • 

    Siva SankarPost author

    May 20, 2019 at 6:45 am

    Permalink

    Dear

    I assume that you are asking about vmware resource pool. you can add the netscaler VM on a resource pool in vcenter no issues.

    Thanks,
    siva

    Reply